Product Code: 500 LPH RO Plant

₹85000

Carbon Filter Working : Down flow Max flow rate : 3m3/hr Min.flow rate : 0.5m3/hr Working pressure : 1.5 – 3.5 kg/cm2 Size : 10”X54” Make : Pentair Valves : Multiport valves 25mm Anti Scalant Dosing Unit Make : IMP Capacity : 6 LPH @ 3.5 bar MICRON CARTRIDGE FILTER Quantity : 1 sat Flow rate : 3m3/hr Rating : 10 micron Make : Filtech / USF CARTRIDGE HOUSING Quantity : 2 nos. Make : Polycarbonate High Pressure Pump Type : Multistage Centrifugal Make : CRI/shakti Drive motor : Single Phase Model : CDL- 2-18 Membrane Housing Type : FPR PSI : 250 Make : ALFA, Imp Size : 4080 E2 MEMBRANE Type : High Rejection Brackish water Membrane : CSM /hi-tech/Vontron Modal : 4040 Size : 40” x 40” Rejection : 99.3% Max. FLOW METER Quantity : 2 nos. Type : Glass Tube Rota mater Make : Flow max, IMP 500 LPH RO Design Basis of R O System

500 LPH RO Plant   

This state-of-the-art Commercial RO Water Purifier is the perfect solution for any business to make sure their employees have access to safe and clean drinking water. It is built with a sediment filter, carbon filter, FRP vessel, and reverse osmosis membrane which work together to ensure 99% of all contaminants are removed from your water supply. The powerful system offers superior performance while ideal for commercial use or large households alike. And each component is designed specifically to reduce chlorine taste & odor as well as particulates like silt & dirt while also balancing pH levels in purified water that tastes fresh and natural every time you take a sip! Enjoy clear, great-tasting filtered water right away with minimal maintenance required - no engine rooms necessary!

Plant Design Basis and Conditions :

  • We have designed this system to produce permeate flow 500 Liters per hour.
  • Maximum TDS Level of Raw Water (input) upto 2500 ppm.
  • The treated water quality as required i.e pH 7-8 after correction,TDS <100 PPM & Hardness < 50 PPM can be achieve , subject to the feed water quality is the same as specified above.In case of any change in the quality of raw water it may have implication on operating parameters or on end results of the system.
  • The system of recovery is properly maintained corresponding to the raw water TDS.
  • RO feed water limiting conditions as mentioned below are strictly maintained,
  • Parameter Results
    Turbidity < 1 NTU
    Free Chloride Nil
    Oil & Grease Nil
    Iron <0.1 PPM
    SDI <4.0
    Temperature < 45 degree C
     

     

    500 LPH RO SYSTEM  

    SCOPE OF SUPPLY  

                        No. Description                                                                   Quantity

     
  • Raw Water Feed Pump with motor                                      1 no.
  • Sand Media filter                                                                   1 no.
  • Activate  Carbon  filter                                                          1 no.
  • Anti scalent Dosing pump                                                    1 no.
  • Housing with filter 5 micron                                                 2 nos.
  • SS Multistage high pressures pump                                     1 no.
  • Membrane Housing 4080 E2 FRP                                         1 no.
  •    R O Membrane High rejection ( 99.3%)Brackish                2 nos.
  •              Water 4040
  • Multi Port Valves 3/4” in & out Imp                                     2 nos.
  • Fine filtered water-blending line with micron
  •              Filter, PVC pipe line and fittings                                        1 lot.      
  • MS electrical panel with controls                                      1 no.
  • Pressures Gauges                                                                3 nos.
  • Rota meter reject & permeate                                           2 nos.
  • SS Skid                                                                                   1 no.
  •  

     

    TECHNICAL DETAILS  

     Row water feed pump

    Type                                              :           Monoblock Centrifugal

    Material of Construction           :           C.I

    Make                                             :           CRI , Kirloskar

    Drive motor                                 :           SinglePhase    

     

    Sand Media Filter

    Working                                        :           Down flow

    Max flow rate                               :           3m3/hr

    Min. flow rate                               :           0.5 m3/hr

    Working pressure                        :           1.5 – 3.5 kg/cm2

    Size                                                 :           10”X54”

    Make                                            :           Pentair

    Valves                                          :           Multiport valve 25mm

  • Carbon Filter

    Working                                        :           Down flow

    Max flow rate                               :           3m3/hr

    Min.flow rate                                :           0.5m3/hr

    Working pressure                        :           1.5 – 3.5 kg/cm2

    Size                                                 :           10”X54”

    Make                                              :           Pentair

    Valves                                           :           Multiport valves 25mm

    Anti Scalant Dosing Unit

    Make                                             :           IMP

    Capacity                                        :           6 LPH @ 3.5 bar  

    MICRON CARTRIDGE FILTER

    Quantity                                        :           1 sat

    Flow rate                                       :           3m3/hr

    Rating                                           :           10 micron

    Make                                             :           Filtech / USF     

    CARTRIDGE HOUSING

    Quantity                                        :           2 nos.

    Make                                             :           Polycarbonate  

    High Pressure Pump

    Type                                              :           Multistage Centrifugal

    Make                                             :           CRI/shakti

    Drive motor                                 :           Single Phase

    Model                                            :           CDL- 2-18  

    Membrane Housing Type          :           FPR

    PSI                                                 :           250

    Make                                             :           ALFA, Imp

    Size                                               :           4080 E2      

    MEMBRANE

    Type                                              :           High Rejection Brackish water

    Membrane                                   :           CSM /hi-tech/Vontron

    Modal                                            :           4040

    Size                                               :           40” x 40”

    Rejection                                       :           99.3% Max.    

    FLOW METER

    Quantity                                        :           2 nos.

    Type                                              :           Glass Tube Rota mater

    Make                                             :           Flow max, IMP    

     

    500 LPH  RO Design  Basis of R O System

  •  


Reviews